DuPont, Color Blending

Super Jet Black Basecoat G9900S

Blending

Apply 1 coat of Adhesion Promoter 222S over the entire repair area. Apply the first coat of G9900S beyond the primed area. Apply the second coat just beyond the first coat. Apply subsequent coats as necessary just beyond the previous coats, staying within the area covered by 222S.

Tips for Success

• Tapering out each consecutive coat melts the new color into the old color.
• Use of a slower Basemaker^® can improve the appearance of the blend edge.
• For alternate blending techniques, see Special Basecoat Blending Procedures in the Specialty Procedures section.