Plastic Refinishing,
SX 1004 / SXA 1004 Aerosol Plastic Cleaner & Prep

Background

• Removes mold release agents, fingerprints, wax, grease and other contaminants.
• Does not soften or distort plastic.

Directions For Use

1. Abrade with DX101 Sanding Paste or SX1002 Sanding Paste.
2. Clean thoroughly with SX 1004 Plastic Cleaner & Prep, wiping on substrate surface in one direction.
3. With clean towel, wipe SX 1004 off in one direction.

Properties

Attention:
When finished spraying aerosol products (SXA 1004), hold can upside down and spray until valve is cleared. This will prevent clogging of the internal valve.