Plastic Refinishing,
SX 1050 / SXA 1050 Aerosol Plastic Adhesion Promoter, PD-708
SX 1050 and SXA 1050 Plastic Adhesion Promoters were developed to promote adhesion
of topcoat materials when refinishing new or repaired plastic substrates.
Features
- Ready to spray
- Packaged in quart and aerosol cans
Compatibles Surfaces
- Properly cleaned and sanded flexible or rigid plastic
- Cured and sanded OEM finishes (except lacquer)
Related Products
- SX 1004 Plastic Cleaner and Prep
Surface Preparation
- Sand substrate with 400 grit paper. Blow off surface.
- Clean with SX 1004 Plastic Cleaner and Prep.
Application Procedures
- Apply 1 light coat of SX 1050 Plastic Adhesion Promoter, the 1 full wet
coat, allowing 5 minutes between coats. Use 20 - 25 psi at the gun for conventional
equipment and 4 - 6 psi at the cap to HVLP equipment,
- Allow to flash a minimum of 10 minutes and maximum of 30 minutes before
topcoating.
- Apply tinted PPG Sealer if desired. Proceed with the appropriate PPG Topcoat
system.
Attention:
When finished spraying aerosol products, hold can upside down and spray until
valve is cleared. This will prevent clogging of the internal valve.
Compatible Topcoats
- CONCEPT® (DCC) Acrylic Urethane
- CONCEPT® LV (CLV) Acrylic Urethane Color
- Delstar®, / Delthane® (DAR/ DXR80)
- Delstar® Acrylic Enamel
- Deltron® 2000 (DBC) Basecoat
- Deltron® (DBU) Universal Basecoat
- OmniT (MBC) Acrylic Basecoat
- OmniT(MTK) Acrylic Urethane
- OmniT (MLV) Low VOC Urethane
- OmniT" (MAE) Acrylic Enamel
- OmniT (MAE/MH) Acrylic Enamel
- OmniT(MCV) Acrylic Urethane
- OmniT (MCV) High Solids Urethane
- OmniT (MCV) Basecoat
- GLOBAL (BC) Basecoat Color
- GLOBAL (DG) Direct Gloss Color
- GLOBAL (DGLV) Direct Gloss LV Color
- Delta® 2800 (DHS) 2.8 VOC Polyurethane
- Delta® 3500 (DUHS) High Solids Polyurethane
- Delta® (DUHS) High Solids Polyurethane Basecoat
- Delta® (DFHS) Fast Dry High Solids Polyurethane
- Delta® (DGHS) Chemical Resistant Polyurethane
- Delta® (DSS) Medium Solids Polyurethane
- Delta® (DVHS) Fast Dry 2.8 VOC Polyurethane
Properties
|
SX 1050 |
(SXA 1050) |
| Packaged
VOC (lbs./US Gal.) |
6.6 |
(5.8)
|
| Volume
Solids (RTS) |
3.06 |
(1.97) |
Sq.
Ft. Coverage @ 1 mil
(100% transfer efficiency) |
49 |
(31) |
